Batch type 10 tpd pyrolysis tire recycling plant-Xinxiang Lifeierte Filter Corp., Ltd

Pyrolysis tyre recycling plant is a recycling plant for solid waste like waste tyre, waste plastic ,oil sludge ,MSW, medical waste etc .It can recycle waste to energy ,such as fuel oil ,carbon black and flammable gas. Besides this energy ,waste tyre pyrolysis plant also can get wire steel after processing.
Waste tyre recycling pyrolysis plant process for two steps with simple introduction.
For the first , Raw material fed to the reactor will be recycled to oil gas by heating by burning material like coal, wood ,fuel oil or natural gas.
In the second step, oil gas will change to fuel oil by cooling condenser . Some oil gas that can't be condensered, will become flammable gas to use again in the furnaces of pyrolysis plant.
So pyrolysis plant can 100% recycle waste to energy like :fuel oil, carbon black and flammable gas ,wire steel from waste tires.
In a word, the pyrolysis plant is a renewable and environmental equipment deals with the waste.

P/N.	LES-2675
Input material	Waste tyre/Scrap tyre/waste plastic
Output products	Fuel oil carbon black flammable gas
Capacity/batch3	1 tons/day.
Land request	one 40HC
Certification	CE ISO SGS BV
Material of reactor	Q345R/Q245R/310S+Boiler plate/Stainless steel.
Cooling system	BOX condenser
Emission standard	100% non-pollution

Waste Tyre/Plastic/Rubber Pyrolysis Tire Recycling Plant to Fuel Oil, Carbon Black Wire Steel.

Different raw material and oil yield

Raw Material	Oil Yield	For example
Waste tire	40-45%	Steel tire, canvas tire, etc. the engineering tire is large in size and needs to be cut, broken and then cracked
Waste rubber	35%	Such as rubber cable leather, rubber sole, conveyor belt, rubber track, etc.
Waste chemical fiber carpet	30%
PMMA	80-85%	Plexiglass, acrylic, etc
PE material	95%	Industrial packaging film, pharmaceutical and food packaging film, daily necessities, building materials, wires, cable insulation skin, etc
PP material	90%	Woven bags, packing bags, injection products such as food utensils, basins, barrels, bottle caps, car bumpers, etc
PS material	90%	CD, CD case, tape case, foam product, home appliance shell, etc.
ABS engineering plastics	40%
Note: 1. PVC and PET materials are not easy to refine 2. The oil delivery rate of big car tire is slightly higher than that of small car tire 3. The oil yield of the materials listed above are all laboratory data, and the raw materials are dry, clean and free of other inorganic materials (water content, inorganic impurity content are not more than 5%) test data.

Pyrolysis plant technical datas

Items	waste plastic pyrolysis plant 1ton-15 tons
Input-Raw Materials	Scrap tire/rubber/plastic/Medical waste/municipal solid waste/waste organic glass
Final products	Fuel oil, carbon black, steel wire, flammable gas.
P/N	LES-2266	LES-2666			LES-2675		LES-2880
Capacity/24h	6Ton/Batch	10Ton/Batch			12Ton/Batch		15Ton/Batch
Oil production(T)/24h	2.7-3.2	3.6-4			4.5-5		5.4-6
Power	5.5KW	5.5KW			7.5KW		7.5KW
Cooling water(T/h)	4	5			6		8
Cooling type	Water-cooled
Noise(dB)	85
Operating	Intermittent
Driving mode	Internal gear		External gear
Reactor material	Q345R/Q245R/310S+Boiler plate/Stainless steel
Structure	Horizontal rotation
Host weight(T)	20		23	26		28
Reactor size(mm)	Ø2200*6600		Ø2600*6600	Ø2600*7500		Ø2800*8000
Space needed	200-300 square meters (Width:10m, Length:20m-30m)
Combustion value	35-50m3

Strength of Lefilter pyrolysis tyre recycling plant

A. We can supply hydraulic feeding system,which can shorten the filling time,save labor,reduce costs,improve production efficiency.With power strength 80 ton and 15 kw motor ,it's competitive than other factories.
Waste Tyre/Plastic/Rubber Pyrolysis Tire Recycling Plant to Fuel Oil, Carbon Black Wire Steel.

B. No leaking and safe with special high temperature flexible graphite packing.

C. Fully enclosed carbon black discharging system.
Automatic discharging by the reactor move forward or back-forward.No pollution caused by carbon black and will not flying out when discharging.

D.Good quality on raw material:
Reactor material is Q345R,which is used for furnace professionally,it has better performance under high temperature working environment than Q245R others used.
Reactor shell is Q235B material,and filled with refractory matters that can keep hot during the heating in good efficiency as well as the direct heating system to save energy and cost.

E.Our pyrolysis plant is equipped with anti-explosion device,safety valves,emergency valves,pressure and temperature meters,as well as the alarming system to avoid emergency happens.

F. Environmental-friendly.

a:Emission Standard:Adopting special gas scrubbers to remove acid gas and dust from smoke .
b:Smell during operation:Fully enclosed during the operation
c:Water pollution:No pollution at all. All water are recycling used,after making the oil cool,then flow into water pool then reused.
d:Air pollution:no air pollution,the waste gas can be discharged into flue gas pool,it's closed.
e:Solid pollution:No solid pollution.All the solid after pyrolysis is the crude carbon black and steel wires which can be deep-processed or sold directly with its value.
Waste Tyre/Plastic/Rubber Pyrolysis Tire Recycling Plant to Fuel Oil, Carbon Black Wire Steel.

G.Box condenser is produced with 8 pcs 133mm tubes and 17 pcs 108 tubes,25 tubes totally can guarantee the high yield and not easily blocked .The length of oil gas will be arround 180m in the tubes and have enough time to cooling down the oil gas to oil.

Waste Tyre/Plastic/Rubber Pyrolysis Tire Recycling Plant to Fuel Oil, Carbon Black Wire Steel.

Company Introduction

Xinxiang Lefilter Filter Corp.,ltd Shangqiu Branch,founded in 2008 is a collection research and development,production,sales and after-sales service in one of the specialized,intergrated company.We're specialized in producing waste tyre pyrolysis oil plant,waste plastic pyrolysis plant to fuel oil, waste rubber pyrolysis plant ,pyrolysis plant for oil sludge ,MSW pyrolysis plant, Waste tyre Oil/plastic oil/ motor oil distillation plant.All of the plants aims to recycle waste to energy or other resource,which meet our mission.With 20 years of technical R&D,we boast 10 technical patents,International CE,SGS,ISO certifications.Due to our excellent sales team and quality products,Our products have been sold to 130 countries and regions all over the world.Over 30 technical engineers, provide services of plant installation and staff training in domestic or International markets.We provide one-stop service from helping apply licence ,manufacturing and install ing plants to staff training.
Waste Tyre/Plastic/Rubber Pyrolysis Tire Recycling Plant to Fuel Oil, Carbon Black Wire Steel.

Our service.

Pre-Sale
*Provide technical guidance and supporting equipment and materials;
*Answer customers' questions, assist customers or design laser processing scheme for customers from the technical point of view;
*Provide equipment exhibition hall for customers to visit, proofing and test machine.
Selling
*Assist customers to plan and design the water and electricity equipment of the production site;
*To provide customers with a full set of operating instructions;
*Provide free training to the customer's equipment operators.
After-Sale
* 1 Years warranty for whole set machine;
*During the warranty period, the company will also send technicians to the site from time to time to carry out technical patrol and answer the questions raised by customers.

Shippment for waste tyre pyrolysis plant

Installation site for pyrolysis equipment
Waste Tyre/Plastic/Rubber Pyrolysis Tire Recycling Plant to Fuel Oil, Carbon Black Wire Steel.

Contact me without hesitation for more details,waste plastic pyrolysis plant project report will be sent to you freely.

Xinxiang Lifilt Filter Co., Ltd. Shangqiu Branch

Batch type 10 tpd pyrolysis tire recycling plant